HOW TO RESET DRUM COUNTER RESET BROTHER DR-2225 ?

1. – Turn on the printer (assuming it is not already on).
2. – Open the front cover.
3. – Press and hold the GO button for 4 seconds or until all the LED’s light up.
4. – Release the GO button and close the front cover.
Your drum counter should now be reset.

Note: This should get you printing again. If you have not replaced the drum your printing will drop in quality as the drum wears down. You’ll still need to replace the drum at some stage. REMEMBER to reset the counter when you replace the drum unit.

The DR-2225 drum unit is used in
HL2130, HL2132, HL2135W , HL2240D, HL2242D, HL2250DN, HL2270DW, DCP7030, DCP7040, DCP7060D, DCP7065DN, DCP8060, DCP8065DN, HL2280DW, MFC7340, MFC7345N, MFC7360N, MFC7365DN, MFC7440N, MFC7460DN, MFC7840W, MFC7860DW, MFC8460N, MFC8660DN, MFC8670DN, MFC8860DN, MFC8870DW