Error Code For HP LaserJet M1005

• Code: –

Display: Engine comm. Error

Description: The device has experienced an internal hardware error.

Remedy:

• Turn off the power by using the power switch, and then wait at least 30 seconds.
• If a surge protector is being used, remove it. Plug the device directly into the wall socket.
• Turn on the power and wait for the device to initialize.

• Code: 50.1

Display: Fuser Error Turn off then on

Description: The device has experienced an internal hardware error.

Remedy:

• Turn off the power by using the power switch, and then wait at least 30 seconds.
• If a surge protector is being used, remove it. Plug the device directly into the wall socket.
• Turn on the power and wait for the device to initialize.
• Code: 50.2

Display: Fuser Error Turn off then on

Description: The device has experienced an internal hardware error.

Remedy:

• Turn Off the Printer:
• Turn off the printer and unplug it from the power source.
• Wait for about 15-30 minutes to allow the fuser unit to cool down.
• Check the Power Source:
• Ensure the printer is connected directly to a wall outlet.
• Avoid using extension cords or power strips, as inconsistent power can affect the fuser’s operation.
• Restart the Printer:
• Plug the printer back into a stable power source and turn it on.
• Check if the error persists.
• Inspect the Fuser Unit:
• Open the printer’s back panel to inspect the fuser.
• Look for any visible signs of damage, such as burned or misaligned components.
• Do not touch the fuser directly as it can get extremely hot.
• Reset the Printer:
• Perform a factory reset on the printer to rule out software or firmware glitches.
• Update Firmware:
  1. – Click on Ok button on printer control panel.
     2. – Press and hold the left arrow key and OK button.
     3. – Release both keys at same time.
     4. – choose the option “Scan top” service.
     5. – Restart the printer.
     It should be working now.
• Check the HP support website for any firmware updates for your LaserJet M1005.
• Install the updates to ensure the printer is running the latest software.
• Replace the Fuser Assembly:
• If the error persists, the fuser may need to be replaced.
• You can order a replacement fuser kit from https://gargcomputers.com/printer-parts/laser-printer-parts/fusser-assembly/fuser-assembly-hp-laserjet-10101012101510181020-canon-lbp2900-3000-rm1-0660-rm1-2086-rm1-2096-import/
• It’s recommended to have a professional technician perform the replacement unless you are experienced with printer repairs.

• Code: 50.3

Display:Fuser Error Turn off then on

Description:The device has experienced an internal hardware error.

Remedy:

1. Turn Off the Printer:
   • Immediately turn off the printer to prevent further overheating.
   • Unplug the power cord from the wall outlet.
   • Wait for 30-60 minutes to allow the fuser to cool completely.
2. Check the Power Environment:
   • Ensure the printer is plugged directly into a stable and grounded power outlet.
   • Avoid using extension cords, surge protectors, or power strips, as inconsistent power delivery can cause fuser errors.
3. Inspect the Fuser:
   • Open the printer’s rear panel and inspect the fuser for any physical damage, such as burns, melted components, or misalignment.
   • Do not touch the fuser directly, as it remains hot for a long time.
4. Reset the Printer:
   • Plug the printer back in and turn it on.
   • Check if the error persists.
5. Update Printer Firmware:
   • Go to the HP support website and check for any firmware updates for the LaserJet M1005.
   • Install the latest firmware, as this might resolve overheating issues caused by software glitches.
6. Replace the Fuser Unit:
   • If the error continues, the fuser assembly might be faulty and needs replacement.
   • Obtain a compatible replacement fuser kit You can order a replacement fuser kit from https://gargcomputers.com/printer-parts/laser-printer-parts/fusser-assembly/fuser-assembly-hp-laserjet-10101012101510181020-canon-lbp2900-3000-rm1-0660-rm1-2086-rm1-2096-import/
   • and have it installed by a professional technician or follow the user manual for instructions.
   • They can assist with additional troubleshooting or provide repair options. If the printer is under warranty, repairs may be covered.

Resolve Error Code 50.8

1. Power Cycle the Printer:
   • Turn off the printer and unplug it from the power source.
   • Wait for 15-30 minutes to allow the fuser to cool down.
   • Plug the printer back in and turn it on. Check if the error persists.
2. Inspect the Fuser Unit:
   • Open the printer’s back panel and carefully inspect the fuser assembly.
   • Look for signs of physical damage, such as:
     • Misaligned components.
     • Broken or loose parts in the pressure release system.
   • Do not touch the fuser directly as it can remain hot for some time.
3. Check Paper Path:
   • Verify there are no paper jams or obstructions in the printer’s paper path that might interfere with the fuser’s operation.
4. Ensure Stable Power Supply:
   • Ensure the printer is plugged directly into a wall outlet and not a power strip or extension cord.
   • Unstable power can disrupt the fuser’s functionality.
5. Update Printer Firmware:
   • Visit the HP support website to check for any available firmware updates for the LaserJet M1005.
   • Updating the firmware can resolve certain mechanical errors caused by software bugs.
6. Reset the Printer Settings:
   • Perform a factory reset to clear any persistent error flags.
   • Refer to your printer’s user manual for instructions on how to reset the device.
7. Replace the Fuser Assembly:
   • If the error continues, the fuser unit may need to be replaced.
   • Obtain a replacement fuser compatible with the LaserJet M1005 and either replace it yourself (if experienced) or seek professional assistance.
   • Buy fuser from bwloe link
   • Obtain a compatible replacement fuser kit You can order a replacement fuser kit from https://gargcomputers.com/printer-parts/laser-printer-parts/fusser-assembly/fuser-assembly-hp-laserjet-10101012101510181020-canon-lbp2900-3000-rm1-0660-rm1-2086-rm1-2096-import/

What Causes the 50.8 Error?

• Mechanical failure of the fuser pressure release mechanism.
• Obstructions or misalignments in the fuser or paper path.
• Wear and tear due to extensive use of the printer.